Installation - Robertshaw Smart Sense Series Installation Manual

INSTALLATION

As with any heating and/or air conditioning project, careful installation is the
key to a successful outcome. Time taken during this installation process will be
rewarded with a satisfied customer and fewer call-backs.
The steps required to install the SMART 2000 thermostat are:
1. Read and understand this manual and the User Manual.
2. Mount the back plate in a suitable location.
3. Set the eight DIP switches to match the need of the project / user.
4. Connect wires to terminal blocks.
5. Wire the optional remote temperature sensor(s) or switches if required.
6. Power up the heating and/or air conditioning system.
7. Set the installer software options (if required).
8. Program and set up the thermostat. (The User Manual will assist with this).
9. Test the heating, cooling and other functions – Commissioning.
6