2.1.4.13 Down-Time Log; 2.1.4.14 Lcd Viewing Angle Adjustment; Figure 2-17. Down-Time Log Screen - L3 Communications ProTec AISA1000-10 Installation And Operation Manual

Automatic identification system hardware
Table of Contents

Advertisement

2.1.4.13 Down-Time Log

This screen shows the date, time and duration that the transponder has been pow-
ered off.
To review Down-Time Log, perform the following:
(1)
Press the FNC key.
(2)
Press the NAV key. The AIS Main System Menu screen will appear.
(3)
Using the down Arrow key, select "View Down-Time Log", and press the ENT
key.
(4)
Use the down arrow to view the down times that are further down the list.
(5)
Press the ESC key to return to the AIS Main System Menu screen.

2.1.4.14 LCD Viewing Angle Adjustment

This menu page allows the user to adjust the contrast of the LCD display on all
pages and screens.
Use the up (↑) or left (←) arrow keys to decrease the viewing angle.
Use the down (↓) or right (→) arrow keys to increase the viewing angle.
To enter adjust the LCD viewing angle, perform the following:
(1)
Press the FNC key, press the NAV key. The AIS Main System Menu screen will
appear.
(2)
Using the down Arrow key, select Adj LCD Viewing Angle, and press the ENT
key. The LCD Viewing Angle Adjust screen will appear. (Refer to Figure 2–18.)
(3)
Use the Left or Up arrows to decrease the viewing angle, or use the Right or
Down arrows to increase the viewing angle.
165M0014-10
Page 2–27
Aviation Recorders
Marine Systems
Figure 2–17. Down-Time Log Screen
Initial Issue
Dec. 01/06

Advertisement

Table of Contents
loading

Table of Contents