2.1.4.10 System Alert Screen
This screen will appear when a system alert is received. Press the ENT key to ac-
knowledge the alert.
2.1.4.11 Alarm Status
The ProTec AIS unit does not support a "General Failure" alarm since all detected
failures are reported with an explicit discrete alarm message. Refer to Table 2–4 for
an explanation of the alarm codes. Table 2–4 explains the codes that are referenced
on this page.
Initial Issue
Dec. 01/06
Aviation Recorders
Marine Systems
Figure 2–13. Password Change Screen
Figure 2–14. System Alert Screen
165M0014-10
Page 2–22