Pilot Systems Output Data And Formats; Pilot Input / Output Port; Table 1-3. Pilot System High-Speed Output Data Formats - L3 Communications ProTec AISA1000-10 Installation And Operation Manual

Automatic identification system hardware
Table of Contents

Advertisement

1.4.2.

Pilot Systems Output Data and Formats

The output data and formats are shown in Table 1–3, and the details of the sen-
tences can be found in IEC 61162-1.
Table 1–3. Pilot System High-Speed Output Data Formats
Data
Notification that a session initiated by messages
ABM, BBM, ACA, AIR is terminated
AIS Own-ship broadcast data (all transmissions
available)
Query response messages
AIS equipment status
LR Interrogation
LR Function identification
All VDL AIS messages received
- Broadcast or
- Addressed to own station
1.4.3.

Pilot Input / Output Port

The Pilot input/output port is a part of the AIS Class A stations. If the installation of
the AIS equipment is such that a pilot cannot connect his Personal Pilot Unit (PPU)
with a reasonable length of cable, an extension cable must be installed with a con-
nector located on the bridge such that the PPU can be connected on the normal
working position of the port.
Initial Issue
Dec. 01/06
Aviation Recorders
Marine Systems
Prepared by AIS Transponder
BIIT Results
Received from Long Range Equipment
Received on VHF Data Link by AIS Transponder
IEC 61162-1 Sentences
ABK - Acknowledgement Message
VDO - VHF Data-link Own-vessel Message
ACA - AIS Channel Assignment
SSD - Station Static Data
VSD - Voyage Static Data
ALR - Alarm Message
TXT - Status / Indication Message
LRI - Long Range Interrogation
LRF - Long Range Function
VDM - VHF Data Link Message
165M0014-10
Page 1–14

Advertisement

Table of Contents
loading

Table of Contents