Table of Contents
Advertisement
2.1.4.5
Channel Management
This page displays all of the relevant information regarding the regions established
either by manual entry, a governing authority's VTS station broadcasting region infor-
mation, or another Universal AIS broadcasting the data. These regions determine
the authorized operating frequencies for the coverage area. The user can set these
different configurations at the initial setup; however, the L-3 ProTec Transponder will
acquire the data for a new region once it has entered the region.
Press FNC → NAV button from any menu and use the up (↑) or down (↓) arrow
keys.
NE:
SW:
ChA:
Bw:
ChB:
Bw:
Plvl:
Md:
TZn:
Src:
MMSI:
For the initial setup perform the following:
(1)
Press the FNC key.
(2)
Press the NAV key. The AIS Main System Menu screen will appear.
(3)
Using the down Arrow key, select "Edit Chan Mgmt Settings", and press the
ENT key. The Channel Management Table Entry screen will appear. (Refer to
Figure 2–8.)
Initial Issue
Dec. 01/06
Aviation Recorders
Marine Systems
Edit Chan Mgmt Settings
NE: N 91'00.0 E 181'00.0
SW: N 91'00.0 E 181'00.0
ChA: 2087 Bw0 ChB:2088 Bw0
PLvl:H Md:TxRxAB TZn: Nm
Src:Intrnl MMSI:---------
FNC: ← Prv. → Nxt. FNC Save
Indicates the North East corner of the region.
Indicates the South West corner of the region.
Channel Frequency for Channel A.
Bandwidth 0 = 25 kHz, 1 = 12.5 kHz.
Channel Frequency for Channel B.
Bandwidth 0 = 25 kHz, 1 = 12.5 kHz.
Power Level H = high power (12.5 Watts), L = low power (2 Watts)
TxRxAB, TARxAB, TBRxAB, RxAB, RAOnly, and RBOnly.
Transition zone size, defined in nautical miles.
Intrnl = Internal command, Extrnl = External command
(governing authority).
MMSI of the authority that has issued the command (blank if internal).
165M0014-10
Page 2–16
Advertisement
Table of Contents
