Figure 2-10. Antenna Position Measurements - L3 Communications ProTec AISA1000-10 Installation And Operation Manual

Automatic identification system hardware
Table of Contents

Advertisement

To enter the antenna position, perform the following:
(Refer to Figure 2–9 and Figure 2–10)
(1)
Press the FNC key.
(2)
Press the NAV key. The AIS Main System Menu screen will appear.
(3)
Using the down Arrow key, select "Antenna Position Setup", and press the ENT
key. The Antenna Position Reference screen will appear.
(4)
Use the up and down arrow keys and the left and right arrow keys to highlight
an entry point, and press the ENT key.
(5)
Enter the data, press the ENT key, and move to the next data entry point.
(6)
Press the ESC key to return to the AIS Main System Menu screen.
NOTE:
The INT antenna is the antenna dedicated to the GPS re-
ceiver internal to the AIS. The EXT antenna is the antenna
dedicated to the ship's dGPS. The dimensions are to be
entered in Meters and are defined as follows: (Refer to
Figure 2–10.)
A
Distance in meters from Forward
Perpendicular (FP)
B
Distance in meters from After
Perpendicular (AP)
C
Distance in meters inboard from
port side
D
Distance in meters inboard from
starboard side
Figure 2–10. Antenna Position Measurements
Initial Issue
Dec. 01/06
Aviation Recorders
Marine Systems
C
A
D
B
165M0014-10
Page 2–18

Advertisement

Table of Contents
loading

Table of Contents