Buttons - Epson Stylus T-1000 User Manual

The
PAPER OUT
l
paper or the paper is loaded incorrectly. If you try to print and the
printer does not respond, check to see if this light is on.
The
ON LINE
l
(The
ON LINE

Buttons

The buttons, or touch-sensitive panels, have several functions, including
selecting draft or NLQ (Near Letter Quality) printing. Draft is good for
quick printing of ordinary work, and NLQ has more fully-formed
characters for final copies or special purposes. NLQ is available in both
Roman and Sans Serif fonts.
The printout below shows the differences among draft, NLQ Roman,
and NLQ Sans Serif so that you can compare the different styles and
densities:
D r a f t p r i n t i n g
NLQ Roman is clear and typewriter-like.
S a n s
N L Q
See Chapter 3 for more information on these modes and ways to select
them.
ON/OFF LINE.
l
off line status.
NLQ/FORM FEED.
l
advances continuous-feed paper to the top of the next form or ejects
a single sheet. When the printer is on line, pressing this button selects
NLQ (Near Letter Quality) printing.
Pressing the
the NLQ font between Roman and Sans Serif. When NLQ Roman is
selected, the beeper sounds twice. When NLQ Sans Serif is selected,
the beeper sounds three times.
light glows red to indicate that the printer is out of
light glows green when the printer can receive data.
light is located on the
i s
S e r i f i s
This button switches the printer between on line and
When the printer is off line, pressing this button
button when the printer is
FORM FEED
Operating
ON/OFF LINE
e x t r e m e l y
a n d
c r i s p
the Control Panel
button.)
f a s t .
d i s t i n c t i v e .
alternates
ON LINE
Setting Up
l-23