Epson Stylus T-1000 User Manual page 52

Problem
All the text is printed
on
the same fine or
text is printed with an
line
extra blank
between
Some
of the
characters printed do
not match
those in the
file
Can't get condensed
print
Solution
This can usually be corrected by changing the
setting of DIP switch
solve the problem, you may need a different
cable.
If they are international characters, check the
settings of DIP switches 1-6 to l-8. If they are
graphics characters, see that your software is
correctly installed and that you have correctly
set DIP switch
l-3.
See that the printer cable is securely plugged
in.
Cancel emphasized mode; it has priority over
condensed.
Cancel NLQ mode; it has priority over
condensed.
Troubleshooting and Maintenance
Problem/Solution Summary
If that does not
2-4.
4-3