Connecting The Wijac2™ System - Jupiter Avionics wiJAC2-T41 Operating Manual

Wireless intercom system with transceiver connection - 4 user - n america
Table of Contents

Advertisement

wiJAC2-T41 Wireless Intercom System with Transceiver Connection - 4 User - N America
3
Connecting the wiJAC2™ System
Note: The wiJAC2-T41 Wireless Intercom Dropcord System consists of one JB66-001 Headset Adapter and
up to four JB67-001 Intercom Adapters. Only paired units will operate together (see
The JB67 Intercom Adapter is connected via an adapter cable (see
the headset dropcord is normally connected, and is then clipped to a suitable point in the aircraft.
A headset is inserted (via adapter cable CAB-HSET-0001 if required) into the jack on the JB66 Headset Adapter,
which is clipped to the user's belt or clothing. Headset and audio panel are not included.
WARNING: JAC recommends that no battery-operated device should be relied upon as the sole
method of communication in cases where there is potential risk to life or limb.
JB67-001
to aircraft
intercom jack
JB67-001 Intercom Adapter
(Plugged in to aircraft intercom jack)
Rev A
ALWAYS charge rechargeable batteries
before every use.
section
section
3.3.2.1) into a jack in the aircraft where
Standard aviation
headset to JB66-001
JB66-001 Headset Adapters
(Connected to user's headsets)
Operating Manual
3.4.)
Page 11

Advertisement

Table of Contents
loading

Table of Contents