Table of Contents
Advertisement
Symbol
1
2
3
4
-
5
6
-
7
8
9
10
11
0 - 9
12
5.3 OptiHeat Control(3 step
Residual heat indicator)
WARNING!
III / II / I There is a risk of
burns from residual heat.
The indicator shows the level
of the residual heat.
6. QUICK GUIDE
6.1 Using the display
• Only the backlit symbols can be used.
• To activate a given option, touch the
relevant symbol on the display.
• The selected function is activated
when you remove the finger from the
display.
• To scroll the available options, use a
quick gesture or drag your finger
across the display. The speed of the
gesture determines how fast the
screen moves.
• The scrolling can stop by itself or you
can stop it immediately if you touch
the display.
Comment
ON / OFF
To activate and deactivate the hob.
Menu
To open and close the Menu.
Zone selection
To open the slider for the selected zone.
Zone indicator
To show for which zone the slider is active.
-
To set the timer functions.
Slider
To adjust the heat setting.
PowerBoost
To activate the function.
Lock
To activate and deactivate the function.
-
The window of the Hob²Hood infrared signal com-
municator. Do not cover it.
Pause
To activate and deactivate the function.
-
To show the current heat setting.
FlexiBridge
To switch between three modes of the function.
The induction cooking zones produce
the heat necessary for the cooking
process directly in the bottom of the
cookware. The glass ceramic is heated by
the heat of the cookware.
• You can change most of the
parameters shown on the display
when you touch the relevant symbols.
• To select the required function or time
you can scroll through the list and / or
touch the option you want to choose.
• When the hob is activated and some
of the symbols disappear from the
display, touch it again. All the symbols
come back on.
• For certain functions, when you start
them, a pop-up window with
additional information appears. To
deactivate the pop-up window
ENGLISH
9
Advertisement
Table of Contents
