AEG IAE64851FB User Manual page 23

Problem
There is no sound when you
touch the panel sensor
fields.
Wrong language is set.
The flexible induction cook-
ing area does not heat up
the cookware.
A cooking zone deactivates.
A warning message saying
the cooking zone is going to
switch off comes on.
and a message come on.
O - X - A appears.
blinks.
Possible cause
The sounds are deactivated.
You changed the language
by mistake.
The cookware is in a wrong
position on the flexible in-
duction cooking area.
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Automatic Switch Off deacti-
vates the cooking zone.
Lock operates.
Child Lock operates.
There is no cookware on the
zone.
The cookware is unsuitable.
The diameter of the bottom
of the cookware is too small
for the zone.
ENGLISH
Remedy
Activate the sounds. Refer to
"Daily use".
Reset all functions to the fac-
tory settings. Select Reset All
Settings from the Menu.
Disconnect the hob from the
electrical supply. After 1 min,
connect the hob again. Set
Language, Display Bright-
ness and Buzzer Volume.
Place the cookware in the
correct position on the flexi-
ble induction cooking area.
The position of the cook-
ware depends on the activa-
ted function or function
mode. Refer to "Flexible in-
duction cooking area".
Use cookware with a diame-
ter applicable to the activa-
ted function or function
mode. Use cookware with a
diameter smaller than 160
mm on a single section of
the flexible induction cook-
ing area. Refer to "Flexible
induction cooking area".
Refer to "Daily use".
Deactivate the hob and acti-
vate it again.
Refer to "Daily use".
Refer to "Daily use".
Put cookware on the zone.
Use suitable cookware. Refer
to "Hints and tips".
Use cookware with correct
dimensions. Refer to "Tech-
nical data".
23