AEG IAE64851FB User Manual page 17

heat setting for each zone separately.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller
than two sections the
display and after 1 minute the zone
switches off.
Incorrect cookware position:
9.4 FlexiBridge Max Bridge
mode
To activate the mode touch
see the correct mode indicator . This
mode connects all sections into one
cooking zone.
blinks on the
until you
Correct cookware position:
To use this mode you have to place the
cookware on the four connected
sections. If you use cookware smaller
than three sections the display shows
and after 1 minute the zone switches off.
Incorrect cookware position:
9.5 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking surface. This function
automatically divides the left cooking
zones into three areas with different heat
settings. The hob detects the position of
the cookware and adjusts the pre-set
power level accordingly. You can place
the pot in the front, middle or rear
ENGLISH 17