Unpacking, Assembly And Preparation; Unpacking; Contents Of Carton; Assembly - Husqvarna DIMAS Cretemower RG 1112 Operating, Maintenance Instructions And Parts List

UNPACKING & ASSEMBLY

Unpacking

Your Dimas RG1112 Cretemower has been from
the factory assembled and requires only minimal
service to insure proper machine preparation
prior to use. Carefully remove carton, packing
materials and the RG1112 from the shipping
pallet. The mini-grinder has been thoroughly
inspected and tested before shipping and
should not require any additional adjustments
prior to use. Check each item making certain
that all items are accounted for and in good
visual condition before discarding any packing
materials.
If there are any damaged or missing parts call
customer service on our toll free number: 1800
241 461

Contents of Carton

1. RG1112 Cretemower
2. Owner's Manual
3. Honda GXV340K2DX3 Engine Manual
4. Warranty Registration Card
6

Assembly

1. Remove two 15/64" 20 Bolts from frame
handle retainer tube.
2. Slide the handle bars into the frame retaining
tubes and align the holes at the desired
height (Fig 1).
3. Re-Install 5/16" 18 Bolts into the frame
handle retainer tube tighten (Fig 2).
Figure 1 Figure 2