CONTROLS & FEATURES
Adjustable Handles
Remove nuts, bolts and washers from frame
handle extension bars. After bolts are removed,
move the handle up or down to desired
position. Align nearest holes and replace the
hardware.
Belt Change
1. Open hood latch and then the hood. Remove
ballast weight.
2. Remove the two bolts that mount the ballast
weight plate. Remove the plate itself.
3. Loosen (DO NOT REMOVE) the four bolts that
mount the Honda engine.
4. Loosen the two bolts on the back of the
engine tensioning plate.
5. Push the engine towards the front of the
machine.
6. Remove belts from sheave.
7. Install new 3VX360 belt and reverse the
process.
18