QUICK REFERENCE GUIDE
Fuel
Type
Capacity
Engine
Type
Oil
Capacity
Spark
Type
Plug
Capacity
Engine
Before each use
maintenance
First 20 hours
of use
Subsequent Hours Service Air filter after 3 months. Change engine oil and clean
Spindle
Before each use
maintenance
First 20 hours
of use
Grinding
Every 4 hours
Head
Rotation
Cleaning
After every use
24
Unleaded Gasoline with a pump octane rating of 86 or higher
0.61 US gal., 2.3 Litres
SAE 10W - 30, API SF or SG, general use
1.16 US qt (1.1 litre), 1.48 US qt (1.4 Litre) w/oil filter
NGK: BPR5ES or NIPPON DENSO: W16EPR-U
0.70 - 0.80mm (0.028 - 0.031 in)
Check oil level, air filter and fuel hose
Re-grease spindle with lithium grease and change engine oil.
and adjust spark plug every 6 months. Replace oil filter, air filter,
and spark plug after 100 hours or one year of use.
Check for End Play. There should be none.
Grease with a small amount of any lithium based grease.
Remove and rotate grinding head 180 degrees in relation
to drive shaft.
Hose down grinding head area under cowling.