Software Licences; Initial Preheating; How To Set: Water Hardness - AEG BSE998330M User Manual

BEFORE FIRST USE
Frequency
Protocol
Max Power

5.4 Software licences

The software in this product contains components that are based on free and open source soft‐
ware. AEG gratefully acknowledges the contributions of the open software and robotics communi‐
ties to the development project.
To access the source code of these free and open source software components whose license
conditions require publishing, and to see their full copyright information and applicable license
terms, please visit: http://aeg.opensoftwarerepository.com (folder GTM3).

5.5 Initial preheating

Preheat the empty oven before the first use.
Step 1 Remove all accessories and removable shelf supports from the oven.
Step 2
Set the maximum temperature for the function:
Let the oven operate for 1 h.
Step 3
Set the maximum temperature for the function:
Let the oven operate for 15 min.
The oven can emit an odour and smoke during preheating. Make sure that the room is ventila‐
ted.

5.6 How to set: Water hardness

When you connect the oven to the mains you have to set the water hardness level.
Use the test paper supplied with the steam set.
Step 1
16/64
2.4 GHz WLAN
2412 - 2484 MHz
IEEE 802.11b DSSS/802.11g/n OFDM
EIRP < 20 dBm (100 mW)
Step 2
.
.
Step 3 Step 4