Table of Contents
Advertisement
Hazardous moving parts. Keep fingers and other body parts away.
CAUTION:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 17.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 23.
4. Remove the system board shield. See "Replacing the system board shield" on page 24.
5. Remove the VESA mount bracket. See "Replacing the VESA mount bracket" on page 25.
6. Disconnect the power supply assembly cable from the system board.
7. Replace the power supply assembly.
Figure 33. Removing the power cord connector
.
Chapter 4
Replacing hardware
27
Advertisement
Table of Contents
