Table of Contents
Advertisement
Figure 75. Removing the card reader
Figure 76. Installing the card reader
7. Connect the new card reader cable to the system board.
8. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 57.
Replacing the system board
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 17.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 23.
4. Remove the system board shield. See "Replacing the system board shield" on page 24.
5. Remove the VESA mount bracket. See "Replacing the VESA mount bracket" on page 25.
6. Remove the heat sink. See "Replacing the heat sink" on page 31.
7. Remove the microprocessor. See "Replacing the microprocessor" on page 32.
8. Remove the Wi-Fi card. See "Replacing the Wi-Fi card" on page 37.
.
Chapter 4
Replacing hardware
47
Advertisement
Table of Contents
