Table of Contents
Advertisement
8. Remove the VESA mount bracket. See "Replacing the VESA mount bracket" on page 25.
9. Remove the power supply assembly. See "Replacing the power supply assembly" on page 26.
10. Remove the cover presence switch. See "Replacing the cover presence switch" on page 29.
11. Remove the system fan. See "Replacing the system fan" on page 30.
12. Remove the heat sink. See "Replacing the heat sink" on page 31.
13. Remove the system board. See "Replacing the system board" on page 47.
14. Remove the integrated camera and microphone module. See "Replacing the integrated camera and
microphone module" on page 48.
15. Remove the back frame. See "Replacing the back frame" on page 51.
16. Remove the internal speakers. See "Replacing the internal speakers" on page 54.
17. Remove the Wi-Fi antennas. See "Replacing the Wi-Fi antennas" on page 55.
18. Replace the LCD panel.
Note: Ensure that you remove and reinstall the screws in order of the numbers as shown.
19. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 57.
Completing the parts replacement
After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.
To reinstall the computer cover and reconnect the cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer.
2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of
the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.
.
Chapter 4
Replacing hardware
57
Advertisement
Table of Contents
