Epson Stylus Pro 3880 User Manual page 64

64 | Printing with Epson Drivers for Macintosh
Note: Check the Epson
Pro Imaging website at
proimaging.epson.com or
your authorized Epson
dealer for other media
that may be available.
Note: The Print Quality
settings available depend
on the Media Type you
selected. Choose lower
print quality for faster
printing, or SuperPhoto -
2880dpi for best quality.
4. Select the
Media Type
on. If you are using a color-managed workflow, make sure you choose
media type and resolution settings that match the ICC profile you are
using.
If your paper is not listed, check the instructions included with the
paper, or look on the Epson Pro Imaging website at
proimaging.epson.com. If you are using non-Epson paper, choose the
closest setting. You may have to experiment with different settings to
determine which one is best for the media you're using.
5. For the Color setting, select
printing. Choose
photos on certain paper types; see page 70. (For paper types that don't
support this option, print black-and-white photos with the
setting.) Select
Black
non-photographic images.
6. Set the option as follows:
Mode
Select
• Automatic
your image or file and make the appropriate printing adjustments. If
a
Quality/Speed
the priorities of your print job.
You can choose one of the mode settings shown at the left:
EPSON Standard (sRGB)
this setting for most color photographs.
Adobe RGB
standard.
7. Select
Advanced Settings
below.
8. Choose one of the following
• Draft
• Normal - 360dpi
• Fine - 720dpi
• SuperFine - 1440dpi
3-64
that corresponds to the paper you are printing
for any type of photographic
Color
Advanced B&W Photo
only if you're printing line drawings or other
to have the printer driver analyze the contents of
slider appears in the Mode box, set it according to
increases the contrast in images. Use
matches image colors to the Adobe RGB color
to access additional options, as described
Print Quality
to print black-and-white
Color
settings: