Also keep the following in mind when using the front slot:
Load only one sheet at a time and make sure the printable side is
•
face-up.
If the paper is wider than 16.5 inches, use the auto sheet feeder or rear
•
slot if allowed for your paper type; see page 28 for details.
If
•
PAPER SIZE CHECK
paper in the front manual feed slot. Use the printer's menu system to
turn this setting on.
1. Make sure the printer is on and
2. Press the front cover to release it and open the output tray.
3. Press the front tray as shown to pop it out.
2-37
Handling Paper and Other Media
is set to
on the LCD, you cannot load
OFF
appears on the LCD.
READY
|
37