Table of Contents
Advertisement
Getting Started
For a typical wireless setup at home, please do the following:
1.
You will need broadband Internet access (a Cable or DSL-subscriber line into your home or
office)
2.
Consult with your Cable or DSL provider for proper installation of the modem.
3.
Connect the Cable or DSL modem to the TEW-815DAP Access Point (WAN port).
4.
Ethernet LAN ports of the TEW-815DAP are Auto MDI/MDIX and will work with both
Straight-Through and Cross-Over cable.
Start
1.
Plug in the power adapter and verify the Power & Ethernet LEDs are light.
2.
To configure the Access Point, open your browser, type 'http://192.168.10.1' into the
address bar
3.
At the Password prompt, the User name is 'admin' and password is admin. Enter default
username and password and press "Login"
15
Advertisement
Table of Contents
