Bosch WFD50810 Installation And Operating Instructions Manual

Front-loading washer

Advertisement

Quick Links

Operating and Installation Instructions
WFD50810
WFD50818

Advertisement

Table of Contents
loading

Summary of Contents for Bosch WFD50810

  • Page 1 Operating and Installation Instructions WFD50810 WFD50818...
  • Page 2 Please read this specification carefully before you use the product. Any failure and losses caused by ignoring the above mentioned items and cautions mentioned in the operation and installation instruction are not covered by our warranty and any liability. Please keep all documents in a safety place for future reference. If you have any doubt, please contact our local service center of dealer.
  • Page 3: Table Of Contents

    Table of Contents Disposal Information ......Operating Instructions Environmental Protection/Conservation Issues ..Safety Precautions and Warnings .
  • Page 4: Disposal Information

    Operating Instructions Disposal Information The new machine s packaging Dispose of packing materials in a responsible manner. Keep packing materials out of the reach of children. Packing mater -ials are not toys. Reprocessing and re-using materials saves raw materials and reduces waste. All packing materials used are environment friendly and re-usable.
  • Page 5: Operating Instructions

    Operating Instructions Before using for the first time: Precautions and Warnings Please read the enclosed documents carefully before using the washing machine for the first time. They contain impor -tant information on the installation, use and safety of the machine. The manufacturer does not accept liability if these instruc- tions are not followed.
  • Page 6: Product Standard

    Operating Instructions Never wash the carpet in the washing machine. Kepp children and pets away from the washing machine. Exercise caution when pumping out hot detergent solution. When the programme has ended: When the programme has ended: The Spin/End indicator light flashes. Open the loading door after cutting the power of machine.
  • Page 7: Your New Washing Machine

    Operating Instructions Your New Washing Machine Filling laundry detergent and/or additive dispensers. Chamber : Detergent for pre-wash,starch, or pre-soaking agent. Chamber : Detergent for main washing period, water softener, blench and stain- removing salt. Chamber Additives, e.g. fabric softener or former(Do not exceed Max ) and close it Open the loading door...
  • Page 8: Control Panel

    Operating Instructions Control Panel Programme Selector Start/Pause button For switching the machine on and off and for selecting For starting/pausing the wash cycle the programme. Can be rotated in either direction. If (programme must have been selected). rotate it during the washing, the programme will be stopped. The programme sequence is electronically controlled.
  • Page 9 Operating Instructions Basic program Select the desired programme(refer also to Programme table ). Cottons/coloureds with Prewash An energy-intensive programme for heat-resistant fabrics made from cotton or linen. For the protection of the drainage pipe, the hot washing solution is mixed with approx. 5 liters of cold water before being drained.
  • Page 10 Operating Instructions Spin speed button For your clothes, there are different spin speeds in different washing programme of BOSCH washing machines. Cottons Easy- Delicates Wool Single Rinse Spin care wash model WFD50810 WFD50818 Single wash cycle without subsequent spin cycle, if the spin cycle is desired after...
  • Page 11: First Wash Cycle

    Operating Instructions The installation of the washing machine is finished. First Wash Cycle (See page 26-33) Each machine has been tested in the factory. A little bit of water can be left in the drum during the test. Please carry out the first wash cycle without laundry to remove any water left over from the factory tests.
  • Page 12: Sorting The Laundry

    Operating Instructions Make sure that the wire-cup bras are machine washable. Make sure that wire-cup bras in a pillow case which can be securely closed with a zip or buttons. If the wire works itself out of the cup it may fall through the holes of the drum and cause extensive damage.
  • Page 13 Operating Instructions Intensive dirt Dirt and/or staining recoganizable. - Kitchen hand towels that have been used for up to one week. - Fabric napkins. - Children's outer clothing or football shirts and shorts with grass and soil stains. - working clothes such as overalls or baker's and butcher's coats.
  • Page 14: Loading The Laundry

    Operating Instructions Loading the laundry Risk of explosion Items of clothing that have been pretreated with solvent-bas- ed cleaning agents, e.g. Stain remover and dry cleaning spirit, represent an explosion hazard once loaded into the washing machine. Therefore, these items must be rinsed thoroughly by hand. Risk of explosion Loose debris in the washing machine drum can damage the laundry.
  • Page 15: Laundry Detergents And Additives

    Operating Instructions Risk of explosion Laundry Detergents and Additives Do not use solvent-based cleaning agents in fully automatic washing machines. Explosion hazard. Keep detergents and additives out of the reach of children. You can use any standard powder or liquid detergent which is suitable for automatic washing machines.
  • Page 16: Washing

    Operating Instructions Filling laundry detergent and/or additive dispensers - Do not fill beyond the Max mark, otherwise will be flushed into the machine together with the detergent at the start of the program. - If the liquid addtive is thick, mix with a little water before dispensing (prevents clogging of the overflow).
  • Page 17 Operating Instructions 3. If required, press the button(s) for additional option(s). The indicator light of the selected button is on. 4. Press the Start/Pause button. The programme starts. Ready/Wash indicator light is on. Maximum noise value during washing: 54.9 dB(A). Changing the programme If you have accidentally selected the wrong programme: Turn the programme selector to...
  • Page 18 Operating Instructions A pause in active programme If you want to add/remove the laundry during active programme and the set programme sequence will not be changed. Press the Start/Pause button during the working cycle, Start/Pause indicator flashes, the programme is pause. 1.
  • Page 19: Programme Table

    Operating Instructions Programme Table Detergent and Additional Always follow the fabric softener function manufacturer s care label instructions Programme Cold 70(110)* 39(59)* 30 C Quick 80(120)* 40 C Cottons/ coloureds 90(138)* 60 C 140(180)* 90 C Prewash Cold 50(70)* 60(80)* 40 C Easy-Care 60 C...
  • Page 20: When The Programme Has Ended

    Operating Instructions When the Programme has Ended Spin/End indicator light flashes. Turn the programme selector to Off . If required: Select an additional programme (Spin or Rinse). ,, ,, Press the Start/Pause button. At the end of the programme option, turn the programme selector to Off.
  • Page 21: Cleaning And Care

    Operating Instructions Cleaning and Care Risk of electric shock! Always disconnect the appliance from the mains before cleaning. Never clean the washing machine with a jet of water. Risk of explosion! Never use solvents to clean the appliance. Cleaning the appliance housing and control panel As required: Use hot soapy water or a mild, non-abrasive cleaning...
  • Page 22: Clean The Drain Pump

    Operating Instructions Clean the detergent dispenser In the event that residual detergents or additives have accumulated. Pull out the detergent dispenser up to the end stop. Press down the hollow on the insert and remove the detergent dispenser completely. Pull up the insert. Rinse the detergent dispenser under hot running water.
  • Page 23: Cleaning Water Inlet Strainers

    Operating Instructions (WFD50818) Carefully remove the pump cap. But do not fully remove it and allow a little more residual water flow into the suitable container. Remove the pump cap. Remove any loose debris/fluff from inside the pump and clean the pump. The pump impeller must be able to rotate. Clean any residual suds or fluff from the thread of the pump cap and pump housing.
  • Page 24: Frost Protection

    Operating Instructions Cleaning the strainer at the water tap Disconnect the hose from the water tap. Rinse the strainer under flowing water. Reconnect the hose. Cleaning the strainer on the washing machine Disconnect the hose from the back of the washing machine.
  • Page 25: Troubleshooting Minor Faults

    Operating Instructions Trouble Shooting Risk of electric shock Minor Faults Repairs must only be carried out by our Customer Service or an authorized technician. If repairs are needed, and assuming that you cannot elim- inate the fault youself with the aid the following table: Turn the programme selector to Off .
  • Page 26 Operating Instructions Fault Possible cause Action A programme without Detergent in chamber is Select Cottons/coloureds Prewash function was not wash away. 90 C Prewash selected. This is not a fault. Water cannot be seen in The water lies below the visible part of the drum. drum.
  • Page 27 Operating Instructions Fault Possible cause Action Detergent residual on the Some phosphate-free Select Rinsing immediately, or laundry. detergents contain brush off spots when laundry is water-insoluble residues dry. that may appear as light spots on the laundry. Grey residues on the Dirt accumulation from Add the maximum amount of det- laundry.
  • Page 28: Installation, Connection And Transport

    Installation Instructions Safety information Installation, Connection and Transport Risk of injury The washing machine is heavy. Take care when lifting it. Caution Frozen hoses can tear/burst. Do not install the washing ma- chine outdoors or in an area prone to frost. Take care not to damage the washing machine .
  • Page 29: Installation Instructions

    Installation Instructions Installation location To ensure the proper operation of the machine,please pay attention to the following when you install the machine. The machine should be installed on the solid and flat floor, never put the machine on the soft carpet or on the wood floor.
  • Page 30: Removing The Transport Bolts

    Installation Instructions Removing the transport bolts The transport bolts must always be removed before using the appliance for the first time and must be retained for any sub- sequent transport (e.g. when moving). Use the spanner provided only if a ring spanner is unavailable. Undo the 4 fixing bolts A and remove them.
  • Page 31: Hose And Cable Lengths

    Installation Instructions Hose and cable lengths Left-hand connection 100cm 140cm Right-hand connection 150cm 110cm Water connection Water supply For the water connection a standard cold-water line with a minimum water pressure of 0.1MPa is required (with tap full ON, at least 8 litres of water must flow out in one minute). If the water pressure exceeds 1MPa, a pressure reducing valve must be added.
  • Page 32 Installation Instructions The plastic nuts on the hose connections must only be tightened by hand. For tight connection between washing machine and water source, you can: G 1 /2 1. Call Customer Service before you install the machine, get the plastic connector freely. It may connect tightly the water inlet pipe and your water tap.
  • Page 33: Leveling Procedure

    Installation Instructions Water Drainage Water Drainage Caution Do not bend or pull the water drainage hose. Height between the placement area and drainage point: maximum 100cm minimum 60cm Drainage into a wash basin( The hose elbow is in the drum). Caution The plug must not block the drain of the wash basin.
  • Page 34 Installation Instructions Transport e.g. when moving Before transporting the washing machine: Turn off the water tap, Drain any residual washing solution (refer to Page 21), Release the water pressure in the supply hose(refre to Page 21), Disconnect the washing machine from the mains, Dismantle the supply and drainage hose, Install the transport bolts.
  • Page 35: Electrical Connection

    Installation Instructions Electrical connection When heating, the maximum current of the washing mach- ine is 10A, so please make suer that the power supply sys- tem (voltage, current and cable) is applicable to the load of the applied appliance. The machine must only be connect to an alternating curr- ent supply via a correctly installed earthed socket.
  • Page 36: Technical Data

    Technical Data & Package List Sheet Technical Data Models WFD50810 WFD50818 Items Rated voltage: 220V~ 220V~ Rated frequency: 50Hz 50Hz Washing capacity: 5.2kg 5.2kg Spinning capacity: 5.2kg 5.2kg Water pressure: 0.1~1MPa 0.1~1MPa Water proof: IPX4 IPX4 Washing power: 200W 200W Spinning power: 460W 460W...
  • Page 37: Warranty

    Customer Service Maintenance According to the Regulations of Responsibility concerning Repair, Exchange and Return of some commodities, war- instruction ranty period of appliance purchased for home use purpose is one year for the complete unit and three years for the functional parts.
  • Page 38: Service Assurance

    Customer Service Service 24 hours hotline service Assurance Door to door service within 24 hours within city boundary Free of charge installation except additional material cost Free of charge consulting Be responsible for service a lifetime long...
  • Page 39: Warranty Card

    Customer Service Warranty card Customer Name Contact telepone Address Purchase date Product code Invoice no. Station telephone Maintenance station Record sheet 5 Address Customer Name Invoice no. Purchase date Product code Production date Maintenance date Serial number Record sheet 4 Address Customer Name Invoice no.
  • Page 40 9000086867 (PD 85 12 10) WFD50810 WFD50818 8008280088 4008855888 0550-3062800 0550-3072600 E-mail: Careline.China@BSHG.com...

This manual is also suitable for:

Wfd50818

Table of Contents