Accton Technology Edge-Core ES4528V Installation Manual page 6

C
OMPLIANCES AND
CE M D
ARK ECLARATION OF
This information technology equipment complies with the requirements of the
Council Directive 89/336/EEC on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility and 73/23/EEC for electrical
equipment used within certain voltage limits and the Amendment Directive 93/
68/EEC. For the evaluation of the compliance with these Directives, the following
standards were applied:
RFI Emission: ◆
◆
◆
Immunity:
◆
◆
◆
◆
◆
◆
◆
◆
LVD: ◆
S S
AFETY TATEMENTS
C
ONFORMANCE FOR
Limit class A according to EN 55022:1998
Limit class A for harmonic current emission according to EN 61000-3-
2/1995
Limitation of voltage fluctuation and flicker in low-voltage supply
system according to EN 61000-3-3/1995
Product family standard according to EN 55024:1998
Electrostatic Discharge according to EN 61000-4-2:1995
(Contact Discharge: ±4 kV, Air Discharge: ±8 kV)
Radio-frequency electromagnetic field according to EN 61000-4-
3:1996
(80 - 1000 MHz with 1 kHz AM 80% Modulation: 3 V/m)
Electrical fast transient/burst according to EN 61000-4-4:1995 (AC/
DC power supply: ±1 kV, Data/Signal lines: ±0.5 kV)
Surge immunity test according to EN 61000-4-5:1995
(AC/DC Line to Line: ±1 kV, AC/DC Line to Earth: ±2 kV)
Immunity to conducted disturbances, Induced by radio-frequency
fields: EN 61000-4-6:1996 (0.15 - 80 MHz with 1 kHz AM 80%
Modulation: 3 V/m)
Power frequency magnetic field immunity test according to EN 61000-
4-8:1993
(1 A/m at frequency 50 Hz)
Voltage dips, short interruptions and voltage variations immunity test
according to EN 61000-4-11:1994 (>95% Reduction @10 ms, 30%
Reduction @500 ms, >95% Reduction @5000 ms)
EN 60950-1:2001
EMI
– 6 –
S (EEC)
AND AFETY