Changing The Default Settings - Epson Stylus Photo 825 Printer Basics Manual

Changing the Default Settings

The printer comes with the following default settings for each print mode:
Index
One
You can change the defaults to the settings you use most often.
1. Make the settings you want to use for one of the print modes.
2. Press the
are saved as defaults, even if you turn off the printer.
3. Repeat steps 1 and 2 for each print mode.
To change back to the factory defaults, first select the print mode you want to change,
then press the
Note: If you want to select Photo Paper or Photo Quality Ink Jet paper, see
page 22 for instructions.
18
Printing Without a Computer
and
Select Photo Brightness
,
Select Photo Brightness
buttons at the same time. The settings
, and buttons at the same time.
Cancel
All
Set