Epson Stylus Photo 825 Printer Basics Manual page 28

2. In the Print Mode menu, select
photos, select
3. At the Paper Type menu, select either
paper you're using.
If you're using EPSON Photo Paper or Glossy Photo Paper, press the
button and hold it until
If you're using EPSON Photo Quality Ink Jet paper, press the
button and hold it until
4. In the Paper Size menu, select either
5. In the Page Layout menu, select
white borders.
(If you're using DPOF, skip to step 7.)
6. At the Select Photo menu, press the
enlarge.
If you want to enlarge more than one picture, press the round
button for each one you want. Press the
than one copy of an enlargement.
7. At the Copies menu, press the
print.
8. In the PhotoEnhance menu, select
Matching or to improve brightness and contrast) or
9. Press the large green
Note: If you're printing more than one glossy enlargement, you'll see PE flash on
the control panel after you print. Load another sheet, then press the
maintenance button to continue.
Keep your pictures and unused paper away from high temperatures and humidity and
out of direct sunlight. See page 12 for more information about storing and displaying
your pictures.
22
Printing Without a Computer
One
.)
Set
flashes on the Select Photo menu.
PP
SF (SuperFine)
button. Your enlargement is printed.
Print
. (If you want to print enlargements of several
or
Glossy Matte
flashes on the Select Photo menu.
, , or
5 x 7 8 x 10
for borderless prints, or
button to select the picture you want to
Select Photo
button to set the number of copies you want to
(if your camera supports PRINT Image
On
Off
, depending on the type of
.
Letter
for prints with
Select Photo
button again to print more
.
b