Samsung ML-920 Service Manual page 21

Disassembly and Reassembly
7. Pull the both side and remove the Pick up Roller,
as shown below.
Pick up Roller
8. Remove the two screws and pull the CIS Cable.
Take out the CIS Ass'y.
CIS Ass'y
9. Remove the one screw securing the CIS Bracket
and take out the CIS.
3-8
CIS
CIS Bracket
10. Remove the four screws securing the ETC
Motor Ass'y and remove it.
11. Unlatch the Cover Switch and remove it, as
shown below.
12. Unlatch the both side and remove the Scan
Board.
Cover Switch
2
1
2
1
Samsung Electronics