Housing Lower Ass'y - Samsung ML-920 Service Manual

3-8 Housing Lower Ass'y

1. Before you remove the Housing Lower Ass'y,
you should remove:
- Rear Cover (see page 3-2)
- Scanner Ass'y (see page 3-3)
- OPE Ass'y (see page 3-4)
- ADF Upper Ass'y (see page 3-5)
- Guide Lower Ass'y (see page 3-6)
2. Unplug the two connectors and FFC Cable from
the Scan Board.
FFC Cable
3. Remove the seven screws securing the ADF
Lower Ass'y.
Samsung Electronics
4. Unlatch the Exit Roller gear part and remove it,
as shown below.
Exit Roller
5. Unlatch the Scan Roller gear part and remove it,
as shown below.
Scan Roller
6. Unlatch the ADF Roller gear part and remove it,
as shown below.
ADF Roller
Disassembly and Reassembly
1
2
1
2
1
2
3-7