JLG R4045 Operation And Safety Manual page 34

SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION AND INSPECTION
g. With the platform elevated on a smooth, firm, level sur-
face with no overhead obstructions, drive the machine
to check if the high drive cutback speed limit is
engaged at the height indicated in Table 2-1. Ensure
drive speed is reduced from a top speed to a slower
speed.
Table 2-1. High Drive Cutout Height
HIGH DRIVE SPEED
MODEL
CUTBACK HEIGHT
R4045
75 in (190.5 cm)
2-10
NOTE:
DRIVE SPEED REDUCTION
2.0 mph (3.2 kph)
to
0.5 mph (0.8 kph)
3. With the platform in the transport (stowed) position.
a. Drive the machine on a grade, not to exceed the rated
gradeability, and stop to ensure the drive motor brakes
hold.
b. Check the tilt indicator light to ensure proper opera-
tion. The light should be illuminated if tilted beyond
allowed settings in Table 2-2.
When the tilt indicator warning is activated the following func-
tions are affected; drive and lift up functions are disabled, plat-
form must be fully lowered (stowed) to drive.
Table 2-2. Tilt Activation Setting
TILT SETTING TILT SETTING
MODEL
(front to back) (side to side)
1.50° - outdoor
1.50° - indoor
2.00 ° - outdoor
R4045
3.50°
2.00° - indoor
2.50° - outdoor
2.50° - indoor
Maximum Deck Elevation
25 - 28.7 ft 7.6 - 8.7 m
31 ft - max. 9.4 - max.
23 - 25 ft 7 - 7.6 m
27 - 31 ft 8.2 - 9.4 m
0 - 23 ft 0 - 7 m
0 - 27 ft 0 - 8.2 m
31215942