Table of Contents
Advertisement
OPERATING THE VACUUM
VERSATILE FLOOR-TO-CEILING CLEANING
UPRIGHT
For cleaning carpets and hard floors. To activate
brush-roll, step on floor nozzle and tilt handle back.
Use the wand
in Above-Floor
Mode for quick
jobs above
shoulder height.
ABOVE-FLOOR
With pod attached, detach the wand from the
floor nozzle.
LIFT-AWAY WITH WAND
Use the wand in Lift-Away mode for more reach
when cleaning above-floor areas like coving or
skirting boards.
NOTE: See previous page for instructions on how to detach the pod, wand, and handle.
10
s h a r kc l e a n . c o . u k
POWERED LIFT-AWAY
Use Powered Lift-Away to reach under furniture to
clean carpets and hard floors.
Use the handle
in Above-Floor
Mode for quick
jobs off the floor.
ABOVE-FLOOR
With pod attached, detach the handle from the wand.
LIFT-AWAY WITH HANDLE
Use the handle in Lift-Away mode for more detailed
cleaning of above-floor areas like upholstery,
window sills or stairs.
MAINTENANCE
IMPORTANT: Remove the battery before performing any maintenance.
To remove, lift the handle on top of the battery and pull up.
EMPTYING THE DUST CUP
To remove Dust Cup, pinch and pull side tabs.
Tilt dust cup away from the vacuum cleaner, then
lift to remove.
Lint
Screen
To remove collected debris from Lint Screen, press
top button and lift handle to open top of dust cup.
Press lower button to open bottom of dust cup.
To reinstall dust cup, place bottom into pod and
then tilt dust cup toward the wand until it clicks
into place.
s h a r kc l e a n . c o . u k
11
Advertisement
Table of Contents
