Table of Contents
Advertisement
Using the VS-570N as a Wireless TTL Slave
You can set the VS-570N as a wireless TTL slave for both the Nikon and Canon TTL systems.
To set the flash to function as an automatic TTL slave, follow these steps:
1.
Make sure the master flash or controller on your camera is turned on and set to automatic TTL mode.
2.
Select the appropriate group and channel on the master unit. Consult the master's manual to find out how
to set it.
3.
Press the VS-570N's Mode button repeatedly to cycle through the flash modes until the Wireless TTL
mode icon appears on the LCD. Use the up or down navigation buttons to select Nikon or Canon TTL
slave modes.
A.
For Nikon TTL slave mode, the N-TTL indicator will appear
onscreen. Press the Mode button to confirm, and the LCD
will display i-TTL.
B. For Canon TTL slave mode, the C-TTL indicator will
appear onscreen. Press the Mode button to confirm, and
the LCD will display E-TTL.
|
36
Using the VS-570N as a Wireless TTL Slave
TTL
TTL
GROUP A
TTL
TTL
GROUP A
Advertisement
Table of Contents
