General Information; Intended Use; Parts List; California Proposition 65 - Horst Welding CONTOUR CHCF30 Operator's Manual

Header wagon
Hide thumbs Also See for CONTOUR CHCF30:
Table of Contents

Advertisement

General Information

The purpose of this manual is to assist you in safely operating and maintaining your Contour Header Wagon in a safe
manner. Read this manual carefully to obtain valuable information and instructions that will help you achieve safe and
dependable service. The illustrations and data used in this manual were current at the time of printing, but due to possible
engineering and/or production changes, this product may vary slightly in detail. Horst Welding reserves the right to update
and/or change components as necessary without notification.
In this manual:
Travel speed rating refers to the maximum speed the trailer components are design for.
Maximum road speed refers to the 40 km/h for slow moving vehicles displaying a SMV.

Intended Use

The Horst Wagons CHCF series header wagon is intended for attachment and use on qualified power units for the sole
purpose of hauling harvester heads.

Parts List

The parts lists for this product can be found online. Visit
our online parts catalogue.

California Proposition 65

You may see a warning label similar to the following:
WARNING
Cancer and Reproductive Harm
www.P65 Warnings.ca.gov
This warning is required by California Proposition 65 (Prop 65), which is meant to notify California residents of exposures
to Prop 65-listed chemicals. For more information go to 'www.P65Warnings.ca.gov.'

Speed Identification Symbol (SIS)

High Speed Tractors Traveling Faster Than 25 mph
The SIS standard is part of the US Federal Regulation 49CFR Part 562. (Does not apply in Canada)
The purpose of the Speed Identification Symbol (SIS) standard is primarily to identify equipment that has been specifically
designed for ground speeds greater than 40 km/h (25 mile/h) but under 65 km/h (40 mile/h), when operating or traveling
on public roads. The SIS also identifies the farm machineries' maximum safe travel speed. Maximum rated safe travel
speed of Horst Header Wagons is 30 mile/h.
The SIS needs to be used in conjunction with the SMV sign.
Horst Wagons supplies a bracket and SIS for U.S. customers to use if they intend on traveling on public roads at speeds
greater than 25 mile/h. See the assembly reference book for your header wagon.
horstwagons.com
and click on the PARTS tab to be directed to
5

Advertisement

Table of Contents
loading

Table of Contents