Table of Contents
Advertisement
4.4 THE WEIGHT STACK CABLE IS FALLING OFF A PULLEY OR CAM
Possible Causes
1) The cable is too loose or too tight.
2) The cable is routed incorrectly.
Solution
1) Check the tightness of the cable. Make sure that it is tensioned properly.
2) Check the routing of the cable through the weight stack.
a. Make sure that the cable is
b. Follow the routing of the cable. The cable should be centered on pulleys and cams before
being tensioned.
CHAPTER 4：TROUBLESHOOTING
not
routed around a standoff in the weight stack frame (Figure A).
13
Advertisement
Table of Contents
