Paper Jam Problems - Epson Stylus Color Stylus Color IIs User Manual

2. Slide the left edge guide on the sheet feeder to the left as far
as it will go.
3. Fan a stack of paper or transparencies; then tap it on a flat
surface to even the edges.
4. Load the paper or transparencies with the printable surface
face up. For coated papers, the printable side is whiter
than the other side. For glossy paper and transparencies,
the printable side is face up when the cut corner is
positioned as shown in the illustration below.
5. Change the printer driver settings so they are appropriate
for the paper or transparency film you loaded.
Once your driver settings are correct, choose Print in the File
menu of your application program to print on the media you
loaded.
Loading Envelopes
Do not use envelopes that are curled or folded, or ones that
are too thin; they may curl during printing. Also, do not
choose 720 dpi resolution for envelope printing.
Follow these steps to load envelopes:
1. Make sure you set the paper thickness and thickness
adjustment levers to the correct positions for envelope
printing.
Ink Jet Printers
2. You can load up to 10 envelopes in the sheet feeder with
the printable side facing up (forward) as shown.
3. Adjust the left edge guide so the envelopes feed straight
into the paper path.
4. Change the printer driver settings so they are appropriate
for the envelopes you loaded.
Once you select the envelope size and change any other
printer settings, choose Print in the File menu to print on the
envelopes.

Paper Jam Problems

If paper jams inside the printer frequently, try the following:
Use a higher quality paper that is suitable for ink jet
printers and is not too thin, too thick, or rough. For best
quality, use EPSON special coated and high-quality glossy
papers.
Fan the stack of paper before you load it.
Do not load too many sheets in the sheet feeder. You can
load up to 100 sheets of plain paper, 70 sheets of special
coated paper, 10 envelopes, 50 sheets of transparency film
(with one sheet of plain paper beneath the stack), or 30
sheets of high-quality glossy paper (with one sheet of
plain paper beneath the stack).
If you loaded plain paper, try turning the stack over. The
printable side may have been facing down.
8/1/95
EPSON Stylus COLOR IIs
EPSON Stylus COLOR IIs-13