Feeding Paper One Sheet At A Time; Loading Special Papers And Other Media - Epson Stylus Color Stylus Color IIs User Manual

EPSON Stylus COLOR IIs
Do not load paper above the arrow mark inside the left edge
guide of the sheet feeder.
5. Slide the left edge guide against the left edge of the paper
as shown below.

Feeding Paper One Sheet at a Time

You may find instances when you prefer to feed paper into
the printer one sheet at a time (when using glossy paper, for
example). Follow these steps:
1. Make sure that printing is paused. To do this, press the
Pause button.
2. Remove any paper from the sheet feeder and the paper
path.
3. Move the paper thickness lever to the thick paper position.
4. Set the thickness adjustment lever for the type of paper you
are loading.
5. Feed the paper one sheet at a time into the sheet feeder.

Loading Special Papers and Other Media

When using special coated paper, glossy paper, envelopes,
and transparencies, keep the following in mind:
Do not touch the printable surface of the paper; hold the
sheets by their edges. The moisture and oils on your hands
can reduce print quality.
Use special coated paper and glossy papers within one year
of purchase. Use transparencies within six months.
Before printing on EPSON high-quality glossy paper, or
special coated paper for 720 or 360 dpi, make sure the color
print head unit is installed and Color Head Unit is selected
in the driver's Document Type dialog box. If you are loading
glossy paper, make sure to set Super - 720 dpi as the
printing mode in the driver's Printing Mode/Options dialog
box.
EPSON Stylus COLOR IIs-12
When printing on high-quality glossy paper or
transparencies, remove each sheet from the output tray
immediately after it is printed. Make sure each sheet is dry
before stacking.
Return unused sheets and envelopes to their original
package as soon as possible after you finish printing.
Unfavorable storage conditions—especially high
temperature, humidity, and direct sunlight—can damage the
media.
Follow any other special loading procedures included in the
rest of this section.
Loading Special Papers and Transparencies
The following procedure explains how to load coated papers,
glossy paper, and transparencies. You can load up to the
following number of sheets in the sheet feeder:
70 sheets of special coated paper. If you load legal-size
special coated paper for 720 dpi, do not load it more than
halfway to the arrow mark on the left edge guide of the
sheet feeder.
30 sheets of EPSON high-quality glossy paper with a
sheet of plain paper beneath the last sheet in the stack. To
avoid printing on the plain paper, print your document
one page at a time.
50 sheets of transparency film, printed one at a time, with
one sheet of plain paper beneath the last transparency in
the stack.
Follow these steps to load special paper or transparency film:
1. Slide out the output tray located at the bottom of the
printer; then pull out the extension.
8/1/95 Ink Jet Printers