Table of Contents
Advertisement
PCI-E Expansion Cards
The 1029P-NR32R can accommodate up to two low-profile PCI-E expansion cards in the
rear slots.
Installing an Add-on Card
Begin by removing power from the system as described in Section 3.1 and removing the
cover as described in Section 3.2.
1. Remove the shield for the PCI-E slot that you wish to populate. Verify that the card you
are installing is supported by the slot.
2. Seat the card firmly into the slot by pushing down with your thumbs evenly on both
sides of the card.
3. Use a screw to secure the top of the card shield to the chassis. The PCI-E slot shields
protect the motherboard and its components from EMI and aid in proper ventilation, so
verify that each unused slot is covered by a shield.
Chapter 3: Maintenance and Component Installation
50
Advertisement
Table of Contents
