Dimensional Outline Drawing; List Of Included Parts - Mitsubishi Electric Lossnay VL-50ES2-E Installation Manual

2. Dimensional outline drawing

For horizontal mounting
Air supply Air supply/
hole exhaust hole
40
198.5
Shutter knob
For vertical mounting
* For vertical mounting, the
display part comes to the
lower side. (The unit cannot
be mounted upside down.)
Pull cord
(VL-50S

3. List of included parts

Pipe mounting plate (1)
Packing (1)
Vertical mounting joint C (1)
Aluminium tapes (large) (3)
Wood screws (6) (for attaching
the mounting plate)
Indoor air Power cable
exhaust hole (VL-50S -E only)
2
Indoor air
exhaust hole
Indoor air
exhaust hole
522
Pull cord
(VL-50S -E only)
2
Shutter
knob
-E only)
2
Air supply/exhaust pipes A (2)
Joint pipe B (1)
Aluminium tapes (small) (1)
Unit mounting screws (5)
* A screwdriver with an axis length of 150 mm
or longer is required.
Mounting plate
Air supply/exhaust
pipe
28
Wall thickness
168
50 to 650
Air supply
hole
Indoor air
exhaust hole
Weather cover (1)
Hood fixing screws (2)
Weather cover mounting plate (1)
Eng-3
Weather cover
109
Unit (mm)
Mounting plate
Attach the twisted part of
the vertical mounting joint C
toward the indoor side.
Weather cover
109
96.5
Wall
Air supply/exhaust
thickness
120 to 730
pipe
Unit (mm)