River Rock Kit H34Df - Montigo HL34 Installation & Maintenance Manual

River Rock Kit H34DF
STEP 1: Remove existing media and burner tray.
Figure 23. H34DF*'s Fireplace Base.
STEP 2: Install the new Rock Tray and front cover. Make sure the
tray is not sitting on top of the pilot.
Figure 23.b Burner Tray Front Cover
STEP 3: Slide the rock guard locator tabs behind the Burner. The
rocks on the Rock Guard should line up between the air inlets of
the burner
Figure 23.c Pushing the Rock Guard down into place.
STEP 4: Slide the rock guard locator tabs behind the Burner. The
rocks on the Rock Guard should line up between the air inlets of
the burner
Figure 23.d Pushing the Rock Guard down into place.
34
STEP 5: Remove the glass door as described in the previous
instruction.
TOP VIEW
SIDE VIEW
3 in 1 faux Rock "A" 1-pc
TOP
SIDE
Rock "E" 32 pcs
STEP 6: Install Rear faux "A" ceramic 3 in1 Rock as shown
Figure 23.e H34DF*'s Fireplace Base.
STEP 7: Install Centre (2) Two faux "B" and "C" ceramic 2 in 1
Rock as shown. Note: Ensure the rocks do not cover the Burner
holes, (reference lines of burner holes (straight lines) and outline
or rocks (ovals)
Figure 23.f Placement of faux ceramic rock "B" & "C" . Note decreasing size of rock diameters
toward centre of burner.
Installation
TOP VIEW
SIDE VIEW
2 in1 Faux Rock "B & C" 2-pcs
TOP
SIDE
Rock "D" 5 pcs
XG0228 - 021419