Technical Data; Noise And Vibration Data - Worx WU645 Instruction Manual

1. ON-OFF SWITCH
2. HAND GRIP AREA
3. SANDPAPER CLAMP
4. CLAMP LEVER
5. CLAMP LEVER LOCK
6. DUST BAG
7. PAPER PUNCH
8. BASE PLATE
9. HOOK AND LOOP SYSTEM

TECHNICAL DATA

Rated voltage
Rated power
Rated no-load speed
Base size
Orbital diameter
Double insulation
Machine weight
06

NOISE AND VIBRATION DATA

A weighted sound pressure
A weighted sound power
Wear ear protection when sound pressure is over
Typical weighted vibration
ACCESSORIES
Sander paper
Paper hole punch
Dust bag
Use 1/4 sheet sanding paper of the following size
If using sanding paper without dust holes, you must use the paper punch to make
holes.
We recommend that you buy all your accessories from the store where you purchased the
tool. Use good quality accessories marked with a well-known brand name. Choose the grade
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can also help and advise.
Palm Sander
13L-WU645-M-070305¸ÄFÓïCE´¦.indd 6
140X115mm for no hook & loop(Clamp only)
102 X 115mm for hook & loop
220V-240V~50Hz/60Hz
240W
15,000min
-1
103x110mm
1.6mm
1.2Kg
80dB (A)
91dB (A)
85dB (A)
2
8.6m/s
1pc
1pc
1pc
ENG
3/5/2007 4:09:49 PM