Epson Stylus Color 440 Printer Basics Manual page 37

32
When the power and
ink out lights are on , you may have a paper jam. Turn off the printer by
pressing the power button. Wait several seconds, then turn it on again. If
no paper ejects, turn off the printer, remove the jammed paper, and turn the
printer on again. If this doesn't solve the problem, contact EPSON as
described on page 40.
When all the lights flash , turn off the printer by pressing the
Wait several seconds, then turn it on again. If this doesn't solve the problem,
contact EPSON as described on page 40.
When all the lights are off , the printer is not receiving power. Try these
solutions:
Make sure the printer is turned on.
Turn off the power and plug the power cord into the outlet again.
Plug a lamp into the outlet to make sure the outlet is working.
Also, make sure the outlet isn't controlled by a switch or timer.
paper out lights flash and the black and color
power button.