Checking The Control Panel Lights - Epson Stylus Color 440 Printer Basics Manual

Checking the Control Panel Lights

paper out light
black ink out
light
color ink out
light
The four lights on your printer's control panel show the printer's status and alert you
to problems such as paper jams.
The power light is on when the printer is on. The power light flashes a few
seconds before the printer begins to print, or when the printer is performing a
maintenance operation, such as cleaning the print head.
When the paper out light comes on , you're out of paper or paper was loaded
incorrectly. Load paper in the sheet feeder and then press the
button. Make sure the paper is in good condition. Also, make sure you place
the paper against the right edge guide, then slide the left edge guide over to
the paper's left edge.
When the paper out light flashes , you have a paper jam. Turn off the printer
and gently pull out all the paper. Check the stack and remove any paper that's
curled, creased, or damaged. Reload the stack and press the
button. Make sure to place the stack against the right edge guide, then slide
the left edge guide up against the paper.
or When an ink out light flashes , that cartridge is running out of ink. Make sure
you have a replacement cartridge.
When an ink out light comes on , that cartridge is completely out of ink.
Replace it immediately. (See page 22 for instructions.)
power light
load/eject
button
cleaning button
power button
load/eject
load/eject
31