Care And Cleaning; Top Up With Rinse Aid; Cleaning The Filters - Hisense HSGA16FW Operating Instructions Manual

Care and cleaning

Top up with rinse aid

When the rinse aid needs topping up, the above symbol lights on the display.
After topping up, it may take a while before the symbol goes out.
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked max.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
NOTE!
For water with a hardness greater than 10–12 °dH, you ought to use rinse aid with citric acid
(known as acid rinse aid).

Cleaning the filters

Coarse filter
The coarse filter traps larger food particles, which cannot get past the drainage pump. Empty the
coarse filter when necessary. It should be cleaned at regular intervals depending on how often the
dishwasher is used.
1. Lift the coarse filter by the handle.
2. Empty the coarse filter.
3. Refit the coarse filter. Press it down until it clicks into place.
20
Coarse filter