Care And Cleaning - Hisense HV6131 Operating Instructions Manual

Care and cleaning

Top up with rinse aid
When the rinse aid needs topping up, the
above symbol lights on the display.
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the
level marked max.
3. Wipe up any splashes of rinse aid
around the compartment.
4. Close the lid firmly.
After topping up, it may take a while
before the symbol goes out.
Top up with salt
When the salt needs topping up, the
above symbol lights on the display.
When the salt runs out, unscrew the cap
and fill the container with salt. Water is
only needed the first time! Wipe clean and
tighten. Run a programme to ensure that
any salt in the dishwasher is rinsed away.
After topping up, it may take a while
before the symbol goes out.
16
Salt compartment lid
WARNING!
In order to avoid rust stains a
dishwashing programme must be started
immediately after adding salt.
Never pour dishwasher detergent into
the salt compartment. This destroys the
water softener!
Coarse filter
The coarse filter traps larger food
particles, which cannot get past the
drainage pump. Empty the coarse filter
when necessary.
1. Lift the coarse filter by the handle.
2. Empty the coarse filter. Remember to
refit it!
Fine filter
Debris that collects on the fine filter is
automatically rinsed away during each
wash. Clean the fine filter when
necessary.
1. Turn the handle anticlockwise.
Coarse filter
Fine filter