Before Washing For The First Time; Water Hardness; Set The Rinse Aid; Top Up With Rinse Aid - Hisense HSGA16FW Operating Instructions Manual

Before washing for the first time

Water hardness

In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important with regard
to how much detergent and rinse aid to use.

Set the Rinse aid

The chapter Settings describes how to set the rinse aid dosage.
For water with a hardness greater than 10–12 °dH, you ought to use rinse aid with citric acid (known
as acid rinse aid).

Top up with rinse aid

By using rinse aid you will improve your drying result. You will also achieve a better dishwashing result
with glassware and dishes.
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked max.
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
8