Program - Select Program - Hisense HSGA16FW Operating Instructions Manual

PROGRAM - Select program

Press the desired program until the program symbol is lit up.
Eco wash
Use when you want to save water and energy. For normally soiled load, such as plates, serving dishes,
cups, glasses and so on.
Auto wash
The dishwasher can measure how dirty the dishes are and adjust water consumption and temperature
accordingly. When newly installed, the program needs to be run five times before it is fully adapted
and can provide the best results.
+ +
Rapid Intensive (Auto wash + SpeedWash + Auto open) is an effective program for slightly dried
leftovers. (This program is not intended for burnt food, such as on oven dishes.)
Intensive wash
A program with a high temperature to dissolve grease on very dirty dishes, such as pans, casserole
dishes and oven dishes. If these dishes do not completely fill the dishwasher, you can add plates and
the like.
Quick wash
This program is used for glasses and porcelain that is slightly dirty, such as coffee cups.
In combination with SpeedWash, a shorter program is achieved (15 minutes).
Rinse
Used to rinse dishes while you wait for the dishwasher to become fully loaded.
Self Cleaning Program
Self-cleaning program for hygienic cleaning of the dishwasher tub, spray arms and spray pipes.
This program should be run (with no dishes in the machine) using normal dishwasher detergent or
citric acid. Special dishwasher cleaners are also available on the market. For the removal of lime scale
deposits, see Dishwasher tub in Chapter Care and cleaning.
Self Cleaning Program (CLn)
1)
Program time 90 minutes.
14
Rapid Intensive
1)
Press and hold the option buttons for Self
Cleaning Program to activate the program. Self
Cleaning Program starts when the door is
closed.