Table of Contents
Advertisement
Maintenance (cont.)
Once Every Three Months
Silver Ion Filter (Soak in Water)
Soak the silver ion fi lter in water.
Removing and setting the fi lter, see
Press the POWER switch to turn off the
power, wait until the blower fan stops rotating
(approximately 2 minutes) before unplugging the
power cord.
1
Remove the fi lter cover.
Remove the silver ion fi lter
2
from the fi lter cover.
3
Clean the fi lter.
Remove any dust from the white net surface with
the nozzle of a vacuum cleaner.
Do not use a nozzle with a brush. This may
damage the fi lter.
20
e̲mj̲ez6cx̲s1.indb 20
e̲mj̲ez6cx̲s1.indb 20
P8
Soak the silver ion fi lter in
4
water.
Do not use detergent or hot water. Also,
do not use a brush or the like to scrub the
fi lter or rub the fi lter while soaking. This may
damage the fi lter.
Any yellow or dark stains may remain on the
fi lter, but should not affect performance.
The fi lter can be soaked for a total of eight
times. After that, replace with a new fi lter.
5
Dry the silver ion fi lter well.
Dry the fi lter on a fl at
surface.
Set the silver ion fi lter into
6
the fi lter cover.
7
Set the fi lter cover.
Soak in cool to
lukewarm water for
about 30 minutes.
2010/05/17 10:28:16
2010/05/17 10:28:16
Advertisement
Table of Contents
