Table of Contents
Advertisement
5. INSTALLATION
b. Assemble the soap tray holder from the
bottom of the sliding rail as Fig. 12 shown.
Fig. 12
c. Assemble the soap tay on the soap tray
holder.
d. Place the sliding rail between the holders
holder as Fig. 13 shown.
6. OPERATION INSTRUCTION
6.1
Product features
1
Water temperature indicator
This indicator indicate the outlet water
temperature and error code. For the
error code please refer to helpful hints
and tips section (page 21).
2
Heating power selector
This section is used to select the
desired working power of the shower.
Point the open
gap upward
Temperature
Fig. 13
The shower have 4 different working
power: Cold "
and III "
higher the outlet temperature.
1
3
Temperature controler
The temperature knob adjusts water
2
temperature by increase/decrease the
- Clockwise rotate, decrease water
3
- Anti-clockwise rotate, increase water
4
4
On/off button
Control the shower unit's electricity
and working start/stop, when push on,
stops.
NOTE: When you press the On/off button
the showerhead. To avoid too hot or too
point directly to human body.
ENGLISH
The larger hole should
be pointed outside
", I(ECO) "
", II "
". The higher the power, the
17
"
Advertisement
Table of Contents
