PaloAlto Networks PA-5400 Series Hardware Reference Manual page 19

Item Component
1 Ground stud
2 Fan Assemblies
3 Electrostatic Discharge (ESD)
port
4 Power Supplies
To view system firmware versions, use the following CLI command:
admin@PA-5400> show chassis firmware
PA-5400 SERIES NEXT-GEN FIREWALL HARDWARE REFERENCE | PA-5400 Series Firewall Overview
Description
Two-post stud used to ground the appliance to earth ground.
Use the provided 6 AWG two#post ground lug to connect a
grounded cable (not included) to the two#post stud.
Provide the appliance with cooling and ventilation. There are
four dual-rotor fan assemblies that can be individually replaced.
For information on replacing or installing a fan, see
PA-5450 Fan Assembly.
Provides a grounding point that you use when removing or
installing appliance components. Secure the provided wrist strap
end of the ESD strap around your wrist and plug the other end
into the ESD port.
Provide AC or DC power to the appliance. A minimum of two
power supplies is required, while additional power supplies can
be used to provide redundancy.
For information on connecting power to the appliance, see
Connect Power to a PA-5400 Series
Replace a
Firewall.
2021 Palo Alto Networks, Inc.
©
19