Grimac TERRY OPALE Capsule Operating Instructions Manual page 23

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17
• (Fig.1a) - Remove the metal outer lid.
• (Fig.1b) - Remove the lid of the tank.
• (Fig.2) - Remove the drip tray and the grill from the tank
(remove any packing bags if any).
• (Fig.3) - Place the tray and the grill in the machine.
• (Fig.5a) - Remove the hoses inside the tank.
• (Fig.5b) - Remove the softener filters inside the tank and
immerse them in water for about 30 minutes.
The machines (Terry Opale Capsule and Terry
Opale Capsule h2O) have only one filter.
• (Fig.6) - After removing the hoses and the filters, remove
the tank from the machine.
• (Fig.7) - Fill the water tank with fresh drinking water.
• Insert the full tank into the machine.
• (Fig.8) - When they are ready, insert the filters into the
hoses (one fi lter for each hose); then place the hoses in the
tank.
• (Fig.1b) - Place the lid on the tank.
• Make sure that the hoses are NOT crushed and the water
does not come out of the tank.
• (Fig.1a) - Place the outer lid on the machine.
Before proceeding to the electrical connec-
tion and operation of the machine, make sure
that all buttons are in OFF position. For h2O,
vapor and Capp models also make sure that
the elements for water, steam and cappucci-
no dispensing are completely inserted (see
also sections 7.1 and 7.2 for proper mount-
ing).
4.2. electrical Connection
electric power may be very dangerous! It is
therefore necessary to strictly follow the
safety regulations. Do not use faulty power
cords.
The operating voltage of the appliance has been pre-set by the
manufacturer. Make sure that the mains voltage corresponds to
the specifications on the technical data plate.
Before connecting the machine to the electrical network, make
sure that all buttons are not pressed, therefore being in the OFF
position.
• (Fig.9) - Insert the plug into the socket in the machine.
• Insert the other plug of the power cord into a suitable wall
socket.
Before switching on and using the machine,
check that the drip tray is fully inserted into
its seat. Warning! an incorrect placement of
the tray may cause spilling of the discharge
water on the set.
23

Advertisement

Table of Contents
loading

Table of Contents