Epson PictureMate Using Manual page 52

Aligning the Print Head
If you have moved PictureMate and print quality is not
as good as it was before—for example, your prints look
fuzzy, or have light or dark lines running through
them—you may need to align the print head.
Make sure PictureMate is turned on but not printing,
and several sheets of paper are loaded.
1
Press the Menu button.
2
Press or to highlight Maintenance, then
press to open the menu.
3
Press or to select Align Print Head, then
press . You see this message:
4
Press the Print button. The following alignment
patterns are printed:
5
Look at the printed squares to determine which
one in each set is the most even, with no streaks
or lines. (You may need to use a magnifying
glass.)
6
Press or to highlight the number for the best
square (1 to 9) in set #1. Then press
#2.
7
Press or to highlight the number for the best
pattern (1 to 9) in set #2.
to move to
51